ESD Rubber Mat

• 

• ESD Rubber Mat

  Material:100% Natural Rubber

  Color:Green/Blue/Grey

  Thickness:2mm or 3mm

  Specification:1.2mX10m,1.0mX10m,0.9mX10m,0.6mX10m

  Surface:Matt or Flashlight
  
  

  A.      Parameters of ESD Rubber Mat

  A. Parameters of Antistatic Table Mat			Specs
  Anti-static layer	Surface resistanΩcm	107-109	1.2mx10mx2mm
  	Frition static voltage V	<100
  Conductivity layer	Surface resistanΩcm	≤106
  	Frition static voltage V	≤106
  Attenuation period of static voltage	5000-500V	<50
  		<1.9s
  Volume resistance	107-109 Ω cm

  B.      Physical characteristics of ESD Rubber Mat

  No.	Test items		Test basis	Test results
  01	Tension strength		GB 1040	3.6Mpa
  02	Breakage coefficient of elongation		GB 1040	188%
  03	Tear strength(right angle)		GB/T529	20.6KN/m
  04	Resilience(6 layers of sheet materials lapping over		GB/T1681	14%
  05	Temperature of impact embrittlement(no cut)		GB5470	-25℃,no damage
  06	Permanent variation under compression,70℃x22h,25% compression		GB10654	17.9%
  07	Aging in hot air(70℃x22h)	Variation of tension strength	GB/T7141	+8.0%
  		Variation of breakage coefficient of elongation		-3.8%
  		Heat loss		1.08%
  Re	National standards as the test basis: GB1040,GB/T529,GB/T1681,GB5470,GB10654,GB/T7141

  
  Laying method of ESD Rubber Mat

  Laying the anti-static mat on the table, then connect the grounding terminal with the surface and the other terminal with the ground. In this way, the accumulated static electricity on the table surface is discharged through the ground wire.The principles are as follows:

  1.    The green layer absorbs and stores the static electricity on the table surface,resistance: 10⁷--10⁹Ωcm;

  2.    The black base is a conductor with resistance less than 10⁶Ωcm,which can discharge the absorbed static electricity;

  3.    One terminal of the ground wire connects with the anti-static mat; the other connects with the ground. Therefore, the static electricity can be smoothly discharged to the ground. In this way, the static electricity on the table surface is discharged.